BS Viscosity Cups (401)

PRODUCT DESCRIPTION

The BS Viscosity Cups is a range of anodised aluminum viscosity cups with integral nozzle. Suited for measuring paints, lacquers and other fluids.  (Note: the cup doesn’t have a  stainless steel insert).

According to (old type)  BS3900: Part A6, 1971. This specification is replaced by BS EN ISO 2431/8S3900 part A6:1996 – see BS EN ISO 2431 series of cups.

Note
The BS Cups have been superseded by BS EN ISO 2431 series of cups.
The cups were originally designed for a flow time range of 30 – 300 seconds (break point*1 method) and 30 – 200 seconds (for fixed volume*2 method).
*1 Break point: The timing is taken at the first break in the continuous flow of the sample.
*2 Fixed volume: For this method the cup is filled as normal, but timing is stopped after a fixed volume (50ml) of sample has passed through the cup orifice.

For optimum performance it is recommend to use the cups within a flow time range of 30 – 100 seconds, (table above refers) using the cups for sample flow above 100 to 300 seconds is not recommended as the linearity is not proportional to higher viscosity products.

Cups can be supplied with Calibration Certificates

Documents (EN) : Datasheet

Looking for the other viscosity device. 

Catch overflow

A relatively deep well surrounding the top of the top cup serves to catch any overflow

Quality Control

Produced under continuous quality control procedures

Supporting the TQC stands

The outer dimensions have been chosen to support the TQC stands

Easy to clean

Cup and orifice design eliminate hard to clean recesses

Engraved serial number

Each cup is provided with an engraved unique serial number

Customer Care

contact us

Customer Service

Free Installation & Training for order amount much than 10,000 THB

DELIVERY SCHEDULE

Differentiate for each goods. Please contact us for information.

1-YEAR OF WARRANTY

For Electric Tester.