Cross Cut Adhesion Test KIT CC3000
PRODUCT DESCRIPTION
The TQC Cross Cut Adhesion Test KIT CC3000 is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating. Two series of parallel cuts cross angled to each other to obtain a pattern of 25 or 100 similar squares. The ruled area is evaluated by using a table chart after a short treatment with a stiff brush, or adhesive tape for hard substrates.
Fully adjustable
The cutting depth of the TQC Cross Cut Adhesion Test KIT CC3000 can be adjusted while the cutter is guided by two ball bearings to assure reproducible results. The depth of the TQC Cross Cut Adhesion Test KIT CC3000 is adjustable to measure coatings up to 250 µm thick.
| Material | Aluminium, Rubber, Vacuum Hardened Stainless Steel |
|---|
Documents (EN) : Datasheet
Looking for the Adhesion devices.
Reproducible results
Reproducible results guaranteed.
Blade holder
The blade holder is kept at a set distance from the surface with the aid of two wheels (ball bearings).
With Trailing edge
With trailing edge acc. ISO 2409.
Houses
[] It is possible to determine if the current coating of a property needs to be completely removed or can be painted over by using the Criss Cut Adhesion Test.
[] By testing the attachment of paint on children’s toys, the toy can be provided with colorful coatings without crumbling when using.
[] Make sure that nail polish is resistant to daily use and prevent crumbling by testing the adhesion.
[] Obviously, it is very important that paint doesn’t end up in food. Test the adhesion of paint on kitchen equipment to prevent this.
Customer Service
Free Installation & Training for order amount much than 10,000 THB
DELIVERY SCHEDULE
Differentiate for each goods. Please contact us for information.
1-YEAR OF WARRANTY
For Electric Tester.
| Standards | ASTM D3359, ISO 2409, ГОСТ 15140 |
|---|---|
| Series | 6 blades, cutting distance 1 mm, 6 blades, cutting distance 2 mm, 6 blades, cutting distance 3 mm, 11 blades, cutting distance 1 mm, 11 blades, cutting distance 1.5 mm |
มาเป็นคนแรกที่วิจารณ์ “Cross Cut Adhesion Test KIT CC3000”
สินค้าที่เกี่ยวข้อง
Film Application
Leneta
Hardness
TQC Sheen
TQC Sheen
Film Application
Color/Gloss
รีวิว
ยังไม่มีบทวิจารณ์