Interchemical Gage (Wheel Gage)

YQH Wet Film Thickness Gauge(Wheel type):
After coating, immediately push the comb gauge into the working surface, make the two sides of reference surface simultaneously touch the reference plate, turn the wheel gauge one circle, then remove it from the coating, observe a position where the middle circumference surface touches the coatings. The wet film thickness will fall on the maximum value corresponding to the division on the end face. Measure several times to gain an average value by using the same method so as to get a representative result.
After application, clean and dry the wheel gauge, put it into a box.

Ordering information: